Create a Generic SIP Handset on the Allworx:
1) Select “New SIP Handset” from the Handsets page.
2) Select “Generic SIP Phone” from the drop-down list.
3) Type “SNOM Portable” as Description
4) Assign a Login ID and password (ID=temp, Password=temp), select “1” for Number of Lines
5) Select “Add”
6) Note the 5xxx user ID assigned by the server (e.g. 5100)
7) Note the Allworx server LAN address (e.g. 192.168.2.254)
8) Handsets page will now show the new Generic SIP Phone
9) Select “Modify” on the new phone
10) Edit the registration name ID and password by inputting the 5xxx user ID from step 6 above, select “Update”
Setup the SNOM via web interface:
1) Find the IP address of the SNOM (e.g 192.168.2.2)
a. From the handset, click the middle button, go to settings and then status, the IP address will be listed
b. Go to your web address and type in this IP address
i. Default Username – admin
ii. Default Password – password
2) From the setup screen click on Network and change the SIP port to 5060
3) Click on time/Date and make sure it is on the same time zone as the Allworx server
4) Click on Identity 1 and configure
a. ID Account = ON
b. Server type = TAHI project
Note:
"Server type" will be located under the SIP tab and called "TAHI (broken Registrar)" in older versions.
c. Account = the Allworx user id (e.g. 51xx)
d. Registrar – Allworx LAN IP
e. Outbound Proxy – leave blank
f. Auth name – leave blank
g. Password = the Allworx user id password (e.g 51xx)
h. Leave mailbox empty
7) Click on the handset tab and choose the handset ID of the handset you want to use the Identity 1, then click SAVE.
For additional information on the Snom M9, visit the Snom Wiki Page at the links below.
Wiki page: http://wiki.snom.com
M9 Documentation: http://wiki.snom.com/Snom_m9/Documentation
Snom, M9, configuration, registration, setip
1) Select “New SIP Handset” from the Handsets page.
2) Select “Generic SIP Phone” from the drop-down list.
3) Type “SNOM Portable” as Description
4) Assign a Login ID and password (ID=temp, Password=temp), select “1” for Number of Lines
5) Select “Add”
6) Note the 5xxx user ID assigned by the server (e.g. 5100)
7) Note the Allworx server LAN address (e.g. 192.168.2.254)
8) Handsets page will now show the new Generic SIP Phone
9) Select “Modify” on the new phone
10) Edit the registration name ID and password by inputting the 5xxx user ID from step 6 above, select “Update”
Setup the SNOM via web interface:
1) Find the IP address of the SNOM (e.g 192.168.2.2)
a. From the handset, click the middle button, go to settings and then status, the IP address will be listed
b. Go to your web address and type in this IP address
i. Default Username – admin
ii. Default Password – password
2) From the setup screen click on Network and change the SIP port to 5060
3) Click on time/Date and make sure it is on the same time zone as the Allworx server
4) Click on Identity 1 and configure
a. ID Account = ON
b. Server type = TAHI project
Note:
"Server type" will be located under the SIP tab and called "TAHI (broken Registrar)" in older versions.
c. Account = the Allworx user id (e.g. 51xx)
d. Registrar – Allworx LAN IP
e. Outbound Proxy – leave blank
f. Auth name – leave blank
g. Password = the Allworx user id password (e.g 51xx)
h. Leave mailbox empty
7) Click on the handset tab and choose the handset ID of the handset you want to use the Identity 1, then click SAVE.
For additional information on the Snom M9, visit the Snom Wiki Page at the links below.
Wiki page: http://wiki.snom.com
M9 Documentation: http://wiki.snom.com/Snom_m9/Documentation
Snom, M9, configuration, registration, setip